More about Triark Pumps

Allweiler Pumps

We are regularly asked for quotations for replacement pumps. The customer usually has all of the existing data to provide us so that we are able to offer them exact replacement units.

In this instance, the replacement required was for an Allweiler Pump.

20150819_153116

The customer only needed the replacement pump to fit onto their existing motor – so a bareshaft pump was offered.

As this was an exact replacement, the old pump could be removed and the new pump installed without any pipework modifications at all.

The pump required was from the NTT Allweiler pump range. This pump is a centrifugal pump and is horizontally mounted with DN25 flanges on the inlet and DN40 flanges on the discharge with a 155mm impeller.

The pump suits the existing motor running at 1450 rpm. The fluid being pumped was a synthetic heat transfer fluid. The pump has a maximum flow rate of 5.5m3/hr (91 LPM) with a delivery head of 6.5m. The design pressure of the pump is 13.3 bar at 250°C.

Do you have an Allweiler pump requirement?

Please do contact our sales team for assistance with your requirements by calling 01621 781144 – or UK freephone 0800 9 788844.

You can email us at sales@tri-ark.com

If you have any questions, you can LiveChat with us during office hours too.

We are here to help and look forward to hearing from you soon.


Back

Get a quote

Complete the form below and we will contact you to discuss your requirements


    We're proud to be experts in exports and to serve worldwide customers on a daily basis.

    Not only are we not tied to any one courier or manufacturer, but our operators speak English, German, French and Arabic. As if that weren't enough, we have GBP Sterling, US Dollar and €uro bank Accounts for your convenience and to avoid bank fees where possible.